J-Bar/ Panhard & Accessories

Body Bolt Kit, Frame Mount Bolt, 3/4-16 in Thread, 3.25 in Long, Hex Head, Washer / Spacer / Climber Gear, Steel, Zinc / Black Oxide, Kit

BOLT KIT FOR ALUM PINION MOUNTS, CLIMBER GEAR FOR PINION & FRAME MOUNTS

Mount is manufactured with two iden-tical sides, allowing it to be removed and fli pped in the event that it is damaged due to a crash. Sold complete with climber hardware.

J Bar Spacer

J Bar With 2nd Heim, Jam and Adjuster

Linkage Adjuster, 3/4-16 in Right Hand Male Thread, 3/4-16 in Left Hand Male Thread, Steel, Black Oxide, Kit

Steel double adjusters increase adjustment capability of control arms, trailing arms, Panhard bars, tie rod ends and other items using threaded tube. Adjuster includes one LH and one RH jam nut.

Panhard Bar Bracket, Frame Mount, Centered, Clamp-On, Adjustable, Steel, Black Powder Coat, 1-1/2 in Square Tubing

This mount lets you change the length of your panhard bar with ease. Change your bar length 2-9/16” by simply swapping bars out. Fits 1-1/2″ x 1-1/2″ square tube, and has a steel insert in the middle...

Panhard Bar Bracket, Frame Mount, Clamp-On, Steel, Black Powder Coat, 1-1/2 in Square Tubing,

Adjustable steel or aluminum brackets clamp to square tubing, providing multiple Panhard bar mounting locations. Brackets are tapped for 3/4"-10 bolts. Steel brackets have outer holes 5" apart...

Panhard Bar Bracket, Frame Mount, Clamp-On, Steel, Cadmium, 2 in Square Tubing

Adjustable steel or aluminum brackets clamp to square tubing, providing multiple Panhard bar mounting locations. Brackets are tapped for 3/4"-10 bolts. Steel brackets have outer holes 5" apart...

Torque Link, J-Bar Canister, Bushing Included, Aluminum, Black Anodized

Our 3/4″-16 threaded J-bar canister allows you to run a 3/4″-1″ tall bushing for traction dampening. This will cushion the rough tracks and allow the rear end to move left slightly to increase...