Steering Shaft Mounting

1-1/2″ STEERING SHAFT SUPPORT BRACKET

Designed by chassis builder Justin O’Brien, these innovative brackets replace a weld-on tab in your cars engine bay to mount the steering shaft which guarantees virtually any header brand/model will fit your car.

Adjustable Steering Column Mount

Our adjustable steering column mounts for 1-1/2″ and 1-3/4″ tubes are available for multiple steering shafts including the collapsible style shaft. These mounts feature built-in steering alignment so when you put the wheel on, you know the...

FIREWALL FLANGE BEARING

Our firewall flange bearing features a lightweight aluminum housing with the same bearing as our steering column mount. This is a .757ID COM bearing that will not melt like plastic ones.

Shaft Collar, 3/4 in ID, Clamp-On, Aluminum, Natural

Aluminum, 2-piece shaft collars are used on sway bars and steering column assemblies

Steering Column Mount

Steering shaft mount, laser cut, die formed, finished bur free, slotted to fit our 47-1261 oversized ¾ inch heim for steering shaft.

Steering Shaft Rod End

Oversize Rod End 3/4 fine thread with two jam nuts. Hole size is 0.757" to slide over 3/4 tube for holding steering shaft

Steering Shaft, Collapsible, 13-1/2 in Long, 3/4-20 Spline, Collapses 3 in, Steel, Black Paint, Universal,

Collapsible shaft is designed to be used in-line near the rack and pinion or steering box, allowing steering shaft compression. For proper installation, shaft should be extended when installed. The heavy wall, 1.140" diameter tubular steel shaft has...

Steering Shaft, Collapsible, 24-1/2 in Long, 3/4-20 Spline, Collapses 7 in, Steel, Black Paint, Universal

Collapsible shaft is designed to be used in-line near the rack and pinion or steering box, allowing steering shaft compression. For proper installation, shaft should be extended when installed. The heavy wall, 1.140" diameter tubular steel shaft has...

Steering Wheel Quick Release, 360 Degree Release, SFI 42.1, Spline, Aluminum, Black Anodized, 3/4 in Shaft, Kit

Disconnects allow easy installation and removal of three-bolt style steering wheels, often used to ease the entering and exiting of vehicles. Quick release aluminum steering wheel hub mates to a steel coupler, which is welded to a standard 3/4" steering...

Steering Wheel Quick Release, Push Button Release, Hex Style, Aluminum, Black Anodized, 3/4 in Shaft, Kit

Disconnects allow easy installation and removal of three-bolt style steering wheels, often used to ease the entering and exiting of vehicles. Quick release aluminum steering wheel hub mates to a steel coupler, which is welded to a standard 3/4" steering...

Steering Wheel Spacer, Hardware Included, Aluminum, Black Anodized

Steering Wheel Spacer, 0.5 in Thick, Hardware Included, Aluminum, Black Anodized

Universal Steering Joints

1