Speedway Motors

1979-Up GM 3-Piece Metric Spindle Bolt Kit

Bolt kit is for use with 1979-Up GM 3 piece spindlesWorks with our 3-piece spindlesIncludes two steering arm bolts and one tapered head socket cap screwSteering arm bolts are serrated head design to...

Adjustable GM Tie-Rod Adapter Stud to Heim

This adjustable tie rod adapter stud allows you to use 5/8" rod ends instead of OEM tie rods on GM Metric or Pinto spindles5/8"-18 threaded end allows you to adjust steering geometry to minimize or...

Aluminum Oval Head Quarter Turn Fasteners, .500 In. Grip, 10/Pack

Ten per packageAluminum construction reduces weight compared to steel fastenersUseful for fastening body panels, hoods, trunk lids, access panels, trap doors, etc..400" (7/16) shank diameterSold in a...

Small Block Chevy/Ford Steel Bellhousing, Wissota Approved*

SBC and SBF engine bolt patternsGM transmission bolt pattern fits Muncie, Saginaw, Bert, Brinn, and Falcon transmissionsWISSOTA approved for Midwest ModifiedsMust be used with a 153-tooth (Chevy) or...

Speedway 1979-Up GM Metric Midsize Spindle Steering Arm

Made from heat-treated steel forgings for maximum strength and resistance to bendingCNC machined to maintain precise OEM geometryApproved for use in IMCA sanctioned eventsUse bolt kit 91034505 each...

Speedway 3-Piece IMCA 79-Up GM Metric Midsize Spindle Kit

Forged and heat-treated steel for maximum strengthPrecision OEM geometry with 8 degree pin inclinationDirect replacement for factory G body spindleThree-piece design for quick, easy replacement

Speedway Flush-Mount Rear Axle Rearend Oiling Can

This 24 oz. capacity rear end fill can holds enough rear end lube to re-fill quick change rear ends after a gear changeLightweight aluminum construction adds minimal weight to the carLarge fill cap...

Speedway Lightweight Nylon Racing Brake Line Kit

Kit includes 25 feet of nylon brake line with all of the necessary fittings3/16" OD brake line has 1900 psi burst pressure rating and works well for high pressure brake systemsIncludeds (2) T...

Speedway Motors Short Arm Metric 3-Piece Spindle

Accepts '79-Up GM Metric rotors, calipers, stock tapered lower ball joints and is reamed to accept 7 degree upper ball joints. The unique three-piece construction provides for fast, convenient and...

Speedway Pinto Spindle Steering Arm

Made from heat-treated steel forgings for maximum strength and resistance to bendingCNC machined to maintain precise OEM geometryApproved for use in IMCA, USMTS, USRA, UMP, and Wissota sanctioned...

Speedway Tapered Ball Joint Reamer, 7-10 Degree

Speedway Washable Air Filter Element, 14 x 4 Inch

Why keep buying paper elements when this one could last a lifetime?Multi-layer cotton gauze design just like the big brands without the big price100% washable and reusable design saves you moneyComes...