Wehrs Machine and Race Products

1-1/2″ STEERING SHAFT SUPPORT BRACKET

Designed by chassis builder Justin O’Brien, these innovative brackets replace a weld-on tab in your cars engine bay to mount the steering shaft which guarantees virtually any header brand/model...

25lb Rectangle Bar Lead Mold

Molding lead the easy way. The NEW Ryan Rosenow inspired Rectangle Bar Lead Mold is designed to make a bar lead that bolts to your weight clamps. The mold has built-in taper to...

2″ Shock Drop Steel

Our 2″ drop shock mount extension bolts into your existing mount on your chassis and extends the shock 2″. Available in steel or aluminum. Comes with a WM148SS shock bolt.

3/16″ THICK 4-BAR/PLATE

3/4 Suspension Tube with Hex

ALUMINUM DOUBLE SIDE QC PINION MOUNT

Same as our WM205, but with an added slot on left side of the pinion to allow a short panhard bar using the same mount. Mount adjusts easily with our climber nut.

ALUMINUM DUAL USAGE PINION MOUNT

Our aluminum dual usage pinion mount is built with 2 identical sides so in the case of an accident you can unbolt the mount, flip it 180 degrees, and you have another good side instead of having to...

Aluminum Engine Spacers (Sold as a pair)

ALUMINUM RIGHT SIDE QC PINION MOUNT

Our aluminum right side quick change pinion mount is a quick adjust climber style for fast adjustments. The slot goes 1-1/2” below pinion center.

Ball Joint Remover

Ditch the pickle fork and choose a tool that works. Our ball joint remover is simple and easy to use. With the nut off the ball joint you want to remove, simply place the remover between ball joint...

Ballast Mold Kit, Various Clamp-On Tubing Sizes, 25 lb Molds,

Bearing / Seal Kit, Inner and Outer Bearings, Seal, Locknut, Wilwood Hybrid Rotor, Kit