Fasteners

Large Back Up Washer

3/16" ID 5/8" OD 1/16" thick Aluminum back up washer. Matches and recomended for the OD of a large head (5/8") rivet

Large Head Exploding Peel Type 3/16" Rivets

3/16" Rivet  1/4"- 3/8" Grip Length or 1/2" - 5/8" Grip Length Available 1/2" O.D. Head  Nail Pulls Completely Through  Strong Hold  Easy to Drill out  250 Count for the Short Grip 200 Count for the Long Grip Peel...

Long Grip 3/16 Rivets

Medium Head Alum/Steel Tri-Fold 1200# Break Load

Constructed from the highest grade alloy used in the industry, our Aluminum/Steel Tri-fold rivets boast a breakload exceeding 1,200 pounds. Compared to common breakloads of 350 pounds, this rivet will set 3x as tight . "Breakload" is what determines how...

Multi-Grip 3/16" Rivets

3/16" Rivet  3/8" O.D. Head 1/4"- 3/8" Grip Length   250 Count The Multi-Grip rivet is more suitable for multiple material thicknesses and irregular holes. The bubbled body is more suitable for filling slightly oversized or irregular holes...

Premium Tri-Fold Alum/Alum 700 Pound Breakload

Constructed from the highest grade alloy used in the industry, our Tri-fold rivets boast a breakload exceeding 700 pounds. Compared to common breakloads of 350 pounds, this rivet will set twice as tight. "Breakload" is what determines how tight a rivet...

Rivet Setting Tool

Use with a cordless drill or impact driver to set a rivet Close to the same speed as using an air riveter and you don't need to have as many tools out Works great when an air hose is not available (like at the track) Comes with 3/32", 1/8", 5/32" &...

Small Head 1/8" Rivets Multi-Grip

Silver Only 3/16" Rivet  1/8"- 1/4" Grip Length  250 count  

Small Head Exploding Peel Type 3/16" Rivets

3/16" Rivet  3/8" O.D. Head (Small) 1/4"- 3/8" Grip Length  Nail Pulls Completely Through  Strong Hold  Easy to Drill out  250 Count  Peel Type Expolding       

Standard Trifold Exploding Rivet

3/16" diameter Rivet  1/8"- 3/8" Grip Length  Tri-Fold Exploding Lightweight Aluminum Nail, Aluminum Head Construction 250 Count   

Threaded Insert with Nut

Drill a 3/8 hold, place black piece through hole and tighten nut on the backside which will give you a 1/4-20 hole in the center. These are more vibration resistant than a typical threaded insert rivet nut. Sold each.