Rear End Components

Gear Cover, 10-Bolt, Bearings / Caps / Plugs Included, Aluminum, Natural / Red Anodized

10 bolt Quick Change Cover fits Winters,Tiger and later PEM Quick Change Rear Endsfits PEM serial numbers 100 and above. Magnesium/aluminum alloy with cover bearings, caps and plugs installed.

Gear Cover, Standard, 10-Bolt, Ball Bearings, Aluminum, Natural, Winters Quick Change, Kit

Gear Cover, Standard, 10-Bolt, Ball Bearings, Aluminum, Natural, Winters Quick Change, Kit

Gear Marking Compound, 0.25 oz Packet, Brush Included

Gear marking compound kit is a good way to identify correct gear contact area when installing or adjusted ring and pinion gear sets. Kit includes gear marking compound and application brush

Grand National Hub Dust Cover O Ring

Small O-Ring for PEM GN Hub Dust Cap. 1.629 inch OD x 1.489 inc ID x .70 inch thick  

Heavy 5/8 Axle Tube 24" Long

Lock Washer, Tab, 2.4 in ID, 2.87 in OD, 0.07 in Thick, Steel, Zinc Plated, 2-1/2 in Grand National Wheel Hub

Lock Washer for 2.5" GN Snout

Lower Shaft Coupler Seal, 0.750 in Thick, Rubber / Steel, Winters 10 in

Lower Shaft Yoke, 1-1/4 in 10 Spline, Dana 1310 Series Joint, Steel,

Lower Shaft, 10/10 Spline, 19.69 in Long, Heat Treated, Open Drive, Steel, Winters 10 in Quick Change,

Nut, 3/8-16 in Thread, Aluminum, Clear Anodized, Allstar Quick Change Gear Covers, Set of 10

Aluminum nuts are pre-drilled for safety wire to prevent them from working loose and causing leaks. Nutshave 3/8"-16 threads. Package of 10.

O-Ring, 3.989 in ID, 4.129 in OD, 0.70 in Thick, Grand National Hub

Small O-Ring for PEM GN Hub Dust Cap.1.629 inch OD x 1.489 inc ID x .70 inch thick

O-Ring, Rubber, 5 On 5 in Hub

O-RING FOR 5X5 GN DRIVE FLANGE