Tools

Drum Wrench, Steel, Natural

Heavy-duty steel wrench eases cap removal or replacement common to large steel fuel or oil drums.

Durometer Gauge, 0-100 Points, Mechanical, Analog, Case

Type-A hardness tester allows quick checks of tire hardness. Gauge reads 0-100.

Engine Lift Plate, 3/16 in Thick, Steel, Cadmium, Spread / Square Bore Carburetor Flange, Each

Ease engine swaps with the Allstar engine lift plate. Bolts to manifold in place of carburetor. Yellow zinc-coated plate fits standard Holley 4150/4160 and 4500 Dominator, Rochester Quadrajet,...

GRAND NATIONAL HUB SOCKET ½” DRIVE

Billet grand national hub socket with 1/2” drive.

Level, Digital, Magnetic Base / Sides, 0-90 Degree Range

Angle gauge features a large LCD display and offers quick, accurate angle measurements from 0° to 90° in 0.5° increments. Magnetic back and sides allow hands-free operation. Includes internal battery...

Load Pull Stick, Ratcheting, 7 in Pull Stick, Digital Screen, Charger / Case, Black, Kit

This load stick bolts in where your shock goes on a shock separate suspension. The stick allows you to change springs with ease and accuracy, along with being able to pull the race car down to...

Lug Nut Socket, 1/2 in Drive, 6 in Long, Steel, Orange Powder Coat, 1 in Lug Nuts

1/2IN DRIVE 1IN WHEEL SOCKET 6IN LONG

Lug Nut Socket, Pit Socket, 1/2 in Drive, Steel, Gray Powder Coat, 1 in Lug Nuts

Hex style pit sockets with a built-in extension prevent extension and socket from separating during wheel changes.

Lug Wrench, Economy Quick Spin, 1 in Socket, 1 in Diameter Tubing, 10 in Long Handle, Steel, Black Powder Coat, Each

Lug wrench is a 1" diameter tube with a shallow 1" socket welded to one end and rotating piece of plastic pipe attached to the other. The 10" handles are angled with rubber grips and the overall...

Milwaukee M12 Rivet Tool *TOOL ONLY NO BATTERY

TOOL ONLY *NO BATTERY

MODIFIED SEAL DRIVER; FITS MUSTANG FRONT & 2.5in

MODIFIED SEAL DRIVER; FITS MUSTANG FRONT & 2.5in

Mud Scraper, 18 in, Plastic, Black

Same head as our standard mud scraper with a shorter handle. Handle is 18″ long